86
The Drive gives me a “Device cannot start. Code (10).”
A: This is a power issue. Make sure your connections are secure.
The other possibility is that the Drive has malfunctioned and
requires service.
I don’t see my Toshiba Drive in My Computer, but it does
appear in Device Manager.
A: Right-click on My Computer. Select Manage in the pop-up menu.
In the Computer Management window, select Storage, then select
Disk Management. In the Disk Management window, you should
see a list of available storage devices. Look for the disk that has a
capacity closest to your Toshiba Drive. Right-click on the right-hand
box; in the pop-up menu select Delete Partition. Once you do this,
it will say “Online” & “Unallocated.” Right-click on the box and select
Create New Partition in the pop-up menu. When the Partition
Wizard appears, select Primary Partition and click on Next. You will
see a default value for the Toshiba Drive; click Next. You will then
see a Drive letter (you can change this Drive letter if you wish); click
Next. You will then be asked to format the Toshiba Drive.
To Next Page
Loading...
