Toshiba QOSMIO G50

User’s Manual 7-3
Qosmio G50
Boot Priority
Boot Priority Options
This tab allows you to select the priority for booting the computer - the
following settings are available:
“HDD” here refers to the Built-in HDD that is defined in the HDD Priority
Option so that it should be recognized first.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*1
The floppy diskette drive is looked for when the boot disk is contained in
external floppy diskette drive.
*2
In this computer, CD-ROM refers to the Fixed optical disc drive.
*3
Only the model with two HDDs is supported.
FDD -> HDD ->
CD-ROM -> LAN
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
*1
,
2. hard disk drive, 3. CD-ROM
*2
, 4. LAN.
HDD -> FDD ->
CD-ROM -> LAN
The computer looks for bootable files on devices
in the following order: 1. hard disk drive, 2. floppy
diskette drive
*1
, 3. CD-ROM
*2
, 4. LAN.
FDD -> CD-ROM ->
LAN -> HDD
The computer looks for bootable files on devices
in the following order: 1. floppy diskette drive
*1
,
2. CD-ROM
*2
, 3. LAN, 4. hard disk drive.
HDD -> CD-ROM ->
LAN -> FDD
The computer looks for bootable files on devices
in the following order: 1. hard disk drive,
2. CD-ROM
*2
, 3. LAN, 4. floppy diskette drive
*1
.
CD-ROM -> LAN ->
FDD -> HDD
The computer looks for bootable files on devices
in the following order: 1. CD-ROM
*2
, 2. LAN,
3. floppy diskette drive
*1
, 4. hard disk drive.
CD-ROM -> LAN ->
HDD -> FDD
The computer looks for bootable files on devices
in the following order: 1. CD-ROM
*2
, 2. LAN,
3. hard disk drive, 4. floppy diskette drive
*1
.
U Selects the USB floppy diskette drive.
N Selects the network.
1 Selects the primary hard disk drive.
2 Selects the primary hard disk drive 2
*3
.
C Selects the CD-ROM
*2
.
M Selects the USB memory drive.