Toshiba QOSMIO G50

10-20 User’s Manual
Qosmio G50
Sound system
In addition to the information in this section, please also refer to the
documentation supplied with your audio device.
Volume control dial
Problem Procedure
No sound is heard Adjust the volume control dial.
Turn the dial clockwise to increase the volume
and turn it counter-clockwise to decrease the
volume.
Check the software volume settings.
Please check to see if Mute is turned to Off.
Check to make sure the headphone connection
is secure.
Check within the Windows Device Manager
application to ensure the sound device is
enabled and that the device is properly working.
For further information, please refer to
“Troubleshooting in Windows” section of
Windows Help and Support.
Annoying sound is
heard
In this instance you may be experiencing
feedback from either the internal microphone or
an external microphone connected to the
computer - please refer to Sound system in
Chapter 4, Operating Basics, for further
information.
Volume cannot be adjusted when Windows is
turned on or turned off.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
No sound is heard Adjust the volume control dial.
Turn the dial clockwise to increase the volume
and turn it counter-clockwise to decrease the
volume.
Turn the volume control dial while verifying the
volume in order to adjust.