User’s Manual 8-11
Qosmio G50
Replacing the batteries
When the batteries in the Full size remote controller reach the end of their
life, the Full size remote controller may not operate correctly or work only
within a short distance from your computer. In this instance, you should
purchase new batteries and replace the discharged ones.
1. Open the battery cover on the back of the Full size remote controller.
2. Replace the batteries.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
Figure 8-7 Removing the batteries
3. Close the battery cover.
Close the cover securely until it clicks.
Set-top box Connection Method and Watching TV on the
Media Center
This section explains how to connect the set-top box and configure settings
for watching TV.
Some models are equipped with a TV tuner.
Connecting the set-top box
Connect the computer and set-top box using the following procedure to
watch TV using the set-top box.
1. Connect the end of the infrared transmitter cable into the computer’s
infrared transmitter cable port.
Batteries
The CATV cable and the coaxial cable are the separate sales.
That the infrared remote control for your set-top box must be compatible in
order to function.
To Next Page
Loading...
Need help?
General