User’s Manual 7-9
Qosmio G50
The default setting is [Disabled]. Changing the setting to [Enabled] enables
the use of this function.
There are two modes, Mode1 and Mode2 in [Enabled]. For normal use, set
the setting to Mode1.
Button Setting
Start Up Logo
This option lets you select from the following two types of logos which is
displayed at computer start up.
Sound Logo
Use this option to enable or disable sound to sound, when a personal
computer is started.
Metal paper clips or hair pins/clips will generate heat if they come into
contact with USB ports. Do not allow USB ports to come into contact with
metal products, for example when carrying the computer in your bag.
If the function does not work with Mode1 setting, change it to Mode2.
Some external devices may not be able to use this function in either mode.
When this happens, change the setting to [Disabled].
Enabled (Mode1) Enables USB Sleep and Charge function.
Enabled (Mode2) Enables USB Sleep and Charge function.
Disabled Disables USB Sleep and Charge function
(Default).
Animation The Logo appears as an animated image
(Default).
Picture The Logo appears as a static image.
Enabled Enables sound to sound (Default).
Disabled Disables sound to sound.
To Next Page
Loading...
Need help?
General