131
Utilities
HDD Protection Utility
HDD Protection Utility
The HDD Protection Utility controls your computer’s hard
disk drive (HDD) protection feature, which parks the HDD
whenever motion is detected on the computer. Using this
utility, you can enable or disable hard disk drive (HDD)
protection, and set the motion detector’s sensitivity level for
AC power and battery power operation.
To use the HDD Protection Utility:
1 To access Sleep Utilities from the Start screen begin
typing
System Settings.
2 Click
System Settings.
3 Click
HDD Protection.
The HDD Protection Properties window appears.
(Sample Image) HDD Protection Properties window
4 Select ON to enable HDD protection, or select OFF to
disable HDD protection.
5 Set the battery and AC power detection levels as
desired.
6 Click
OK.
To Next Page
Loading...
Need help?
General