EasyManuals Logo
Home>Toshiba>Laptop>Qosmio X70-A series

Toshiba Qosmio X70-A series User Manual

Toshiba Qosmio X70-A series
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
137
If Something Goes Wrong
Problems when you turn on the computer
The computer displays the WARNING RESUME
FAILURE/
Windows Error Recovery – Windows did not shut down
successfully message.
To continue, select
Start Windows normally. This can
happen if the computer was put into Sleep mode and the
battery has discharged. If you performed a shutdown before
this message was displayed, a program or driver may have
prevented Windows
®
from shutting down.
Data stored in the computers memory has been lost. Data
stored in the computer’s internal storage drive may not be
affected.
Always save your data even when you are using Sleep
mode. If your battery fully discharges, information that has
not been saved will be lost. Your computer can be
configured to warn you when the battery is running low see
“What to do when the main battery runs low” on page 97.
If you are running on battery power, it is recommended that
you do not leave the computer in Sleep mode for long
periods of time.
To charge the battery, leave the computer plugged into a live
wall outlet for several hours. For more information see
“Charging the main battery” on page 93.
The AC power light is blinking.
If the AC power light is blinking, try the following steps:
1 Connect the AC adaptor to a different power outlet,
preferably in a different room. If the computer starts
normally, there may be a problem with the AC outlet
itself, or the voltage level available from it.
2 Verify that the AC adaptor is the correct unit for your
computer model. The computer may not be able to start
from an AC adaptor that is rated for less current
(amperage) than the computer requires, even if the rated
voltage is correct, and the plug fits correctly in the DC-IN
socket. The labels on the bottom of the computer and
the AC adaptor show the specifications for voltage (“V”)
and current (“A”) for each device. The voltage level must
match exactly. The amperage rating of the AC adaptor
must be equal to or greater than that required by the
computer.

Table of Contents

Other manuals for Toshiba Qosmio X70-A series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba Qosmio X70-A series and is the answer not in the manual?

Toshiba Qosmio X70-A series Specifications

General IconGeneral
BrandToshiba
ModelQosmio X70-A series
CategoryLaptop
LanguageEnglish

Related product manuals