53
Getting Started
Adding memory (optional)
(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The
memory module should be completely inserted into the
socket and level when secured in place.
(Sample Illustration) Inserting the memory module into the slot
For this model, Slot A is the bottom slot. Slot B is the top
slot. If only one memory module is to be installed, it must
be installed in Slot A.
16 Replace the memory module slot cover and secure it
using the screw(s).
17 Re-insert the battery. For more information on inserting
the battery, see “Inserting a charged battery” on
page 103.
18 Turn the computer right side up. Make sure to remove
the soft cloth from the work surface before restarting the
computer.
Back of computer
Slot B
Slot A
NOTE
To Next Page
Loading...
