89
Learning the Basics
Toshiba’s online resources
3 Gently press the tray in to close it.
Removing a disc with the computer off
To remove a disc with the computer turned off:
1 Insert a slender object, such as a straightened paper
clip, into the manual eject hole.
The disc tray slides partially out of the drive.
Never use a pencil to press the manual eject button.
Pencil lead can break off inside the computer and
damage it.
2 Pull the tray out until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently press the tray in to close it.
Toshiba’s online resources
Toshiba maintains a number of online sites to which you can
connect. These sites provide information about Toshiba
products, give help with technical questions and keep you
up to date with future upgrades. For more information, see
“Contacting Toshiba” on page 168.
To Next Page
Loading...
Need help?
General
