To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAS-10S3KV-E and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Outdoor Unit Dimensions (W x H x D) | 660 x 530 x 240 mm |
Critical safety warnings regarding electrical shock and installation. Avoid opening or repairing the unit yourself.
Important safety advice including avoiding direct cool air, inserting objects, and handling abnormalities.
Precautions for safe operation, installation, and maintenance, including ventilation and environmental considerations.
Explanation of the indicators on the indoor unit display panel, including Hi Power, Filter, Timer, and Operation lights.
Instructions for opening the air inlet grille and attaching the air filters as per the accessory sheet.
Guide for loading batteries into the remote control, ensuring correct polarity and using AAA type batteries.
Steps to set the clock on the remote control using the CLOCK and SET buttons for accurate timer functions.
Procedure to reset the remote control by removing and reinserting batteries, or pressing the reset button.
How to adjust the vertical louver direction using the FIX button and activate automatic swing using the SWING button.
Detailed list and description of all buttons on the remote control and their respective functions for operating the unit.
How to use the ONE-TOUCH button for fully automated operation customized to typical regional preferences.
Instructions for automatically selecting cooling, heating, or fan-only operation and setting desired temperature and fan speed.
Guide to manually select Cool, Heat, or Fan only modes, set temperature, and adjust fan speed for desired comfort.
How to operate the unit in Dry mode for dehumidification, controlling moderate cooling performance and temperature.
Instructions to start and stop Hi-POWER operation for faster room temperature and airflow control.
How to start and stop ECO operation for energy saving, which adjusts set temperature automatically.
How to operate the unit using the RESET button in case the remote control is misplaced or discharged.
Steps to set a specific time for the air conditioner to turn on automatically.
Steps to set a specific time for the air conditioner to turn off automatically.
Procedure to set both ON and OFF timers to activate daily on a recurring basis.
How to set and memorize preferred operation settings for future use via the PRESET button.
How to set or cancel the auto restart feature which resumes operation after a power failure.
Instructions to operate the unit at super low fan speed for quiet operation, noting potential impact on cooling.
How to activate comfort sleep for automatic air flow control and setting an automatic OFF timer for 1-9 hours.
Procedure to turn off the FILTER indicator light after cleaning the filter by pressing RESET or FILTER button.
Guidance on cleaning the indoor unit and remote control with a damp cloth, avoiding harsh chemicals.
How to use the self-cleaning function in Cool or Dry mode to reduce moisture and prevent odors in the indoor unit.
Details on operating conditions for Heating, Cooling, and Dry modes, including recommended outdoor and room temperatures.
Checks for when the unit fails to operate, such as power supply, circuit breaker, or timer settings.
Troubleshooting steps for reduced cooling or heating performance, including filter checks and temperature settings.
Guide to selecting Remote Control A or B for managing multiple indoor units installed nearby.
