EasyManua.ls Logo

Toshiba RAS-13EKV-EE User Manual

Toshiba RAS-13EKV-EE
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
R410A
SERVICE MANUAL
SPLIT TYPE
Indoor Unit Outdoor Unit
<High Wall, Heat Pump Type> <Heat Pump Type>
RAS-07EKV-EE RAS-07EAV-EE
Revised on Nov., 2013
FILE NO. SVM-13029-2
RAS-10EKV-EE RAS-10EAV-EE
RAS-13EKV-EE RAS-13EAV-EE
Question and Answer IconNeed help?

Do you have a question about the Toshiba RAS-13EKV-EE and is the answer not in the manual?

Toshiba RAS-13EKV-EE Specifications

General IconGeneral
Cooling Capacity3.5 kW
Heating Capacity4.0 kW
Power Supply220-240V, 50Hz
RefrigerantR410A
Weight (Indoor Unit)9 kg
Indoor Unit Weight9 kg

Summary

Safety Precautions

Product Specifications

R410A Refrigerant Handling and Safety

3-1. Safety During Installation and Servicing

Crucial precautions for handling R410A during installation and servicing.

3-3. Required Tools for R410A

Lists tools required and recommended for R410A installation and servicing.

3-4. Refrigerant Recharging Procedure

Step-by-step guide for recharging refrigerant in the air conditioner system.

System Wiring Diagram

Control System Block Diagrams

Installation Procedures Guide

10-1. Installation Diagram and Overview

Visual guide for installing both indoor and outdoor units.

Troubleshooting and Fault Diagnosis

11-1. Initial Confirmation and Primary Judgment

Initial checks for power, voltage, and basic diagnostic methods.

11-3. Indoor Unit LED Error Diagnosis

Interpreting LED error codes for indoor unit fault diagnosis.

11-4. Remote Controller Self-Diagnosis (Check Codes)

Guide on accessing and using the remote controller's service mode for diagnosis.

11-5. Troubleshooting by Symptom

Troubleshooting based on observed symptoms related to indoor unit, wiring, and outdoor unit.

11-6. Checking Main Components

Procedures for checking key components like sensors, valves, and fan motors.

11-7. Outdoor Unit Inverter Diagnosis

Diagnosis flow for the outdoor unit's inverter assembly and related components.

11-8. PC Board and Motor Inspection

Steps for inspecting the indoor PC board and testing fan motors.

11-9. Outdoor Fan Motor Diagnosis

Guide to testing the outdoor fan motor's functionality.

Related product manuals