Fan motor 1) Follow the procedure
-
and
2) Remove 3 fixing screws, then remove
Cover motor assembly.
3) Loosen the set screws of the transverse
fan from the vent.
4) Remove 2 screws from the Motor-
band (right)
5) Pull the motor band(right) and the Fan-
Motor outward.
<Point to note during re-installation>
For the position of the fan motor, please install
such that the fan motor connector matches
the position and enters the space of the ribs
of the motor band(right).
No. Part name Work procedure Remarks
9
Set screw
Screws
Motor band(right) Motor connector
1
6
8
Fixing screw
ā 110 ā
FILE NO. SVM-14017
To Next Page
Loading...
