Toshiba RAS-16PKVP-ND User Manual (English)

Other manuals for Toshiba RAS-16PKVP-ND

Service Manual114 pages

Installation Manual26 pages

Questions and Answers:

R
richardhicksAug 7, 2025
What to do if my Toshiba Air Conditioner is not turning on?
- J
  Jeremy OwenAug 7, 2025
  If your Toshiba Air Conditioner is inoperative, there are several possible reasons. First, ensure that the main power switch is turned on. Also, check if the circuit breaker has been activated, cutting off the power supply, and reset it if necessary. Examine the main power fuse and replace it if it has blown. Verify that there is an electric current. Replace the batteries in the remote controller. If the ON timer is set, disable it. Finally, remember that as a protective measure, the air conditioner may not operate for 3 minutes after restarting or turning on the main power; wait for 3 minutes and try again.
D
Deborah CarterAug 18, 2025
Why is my Toshiba RAS-16PKVP-ND not cooling properly?
- M
  mhernandezAug 18, 2025
  If your Toshiba Air Conditioner isn't cooling effectively, several factors could be responsible. Check that the air inlet or outlet of the outdoor unit isn't blocked. Ensure all doors and windows are closed. A clogged air filter can also reduce performance, so clean it. Make sure the louver is correctly positioned. Check that the fan speed isn't set too low, and adjust it as needed. The air conditioner might be in DRY or SLEEP mode, so switch to a more suitable setting. If you are in cooling operation, the temperature setting might be too high, so lower it. Finally, ensure that the air conditioner is being used within its specified operating conditions. If none of these steps work, remove the cause of the problem, and after about 30 seconds, turn on the circuit breaker again.
R
Richard TuckerAug 27, 2025
What to do if my Toshiba RAS-16PKVP-ND is not heating properly?
- T
  Todd GrahamAug 27, 2025
  If your Toshiba Air Conditioner isn't heating effectively, several factors could be responsible. Check that the air inlet or outlet of the outdoor unit isn't blocked. Ensure all doors and windows are closed. A clogged air filter can also reduce performance, so clean it. Make sure the louver is correctly positioned. Check that the fan speed isn't set too low, and adjust it as needed. The air conditioner might be in DRY or SLEEP mode, so switch to a more suitable setting. If you are in heating operation, the temperature setting might be too low, so increase it. Finally, ensure that the air conditioner is being used within its specified operating conditions. If none of these steps work, remove the cause of the problem, and after about 30 seconds, turn on the circuit breaker again.

Toshiba RAS-16PKVP-ND Specifications

General

Technology	Inverter
Refrigerant	R410A
Power Supply	220-240V, 50Hz
Cooling Capacity (kW)	4.69 kW
Energy Efficiency Ratio (EER)	3.21 W/W

Summary

Accessories

Included Accessories

Visual display of included accessories with images.

Safety Precautions

General Safety Rules and Symbols

Covers safety symbols, DANGER, WARNING, CAUTION categories, and general rules.

Electrical and Installation Safety

Focuses on electrical hazards, wiring, and installation requirements.

Operational and Usage Safety

Addresses operational hazards, ventilation, and maintenance precautions.

Specific Operational and Maintenance Safety

Details safety during maintenance, unit placement, and environmental factors.

Component Identification

Indoor Unit Components

Identifies and labels components of the indoor unit.

Outdoor Unit Components

Identifies and labels components of the outdoor unit.

Indoor Unit Indicators and Controls

Indoor Unit Display Panel Indicators

Explains the indicators on the indoor unit's display panel.

Indoor Unit Reset Button Function

Describes the function and usage of the RESET button.

Remote Controller Functions

Remote Controller Buttons and Functions

Details the function of each button on the remote controller.

Remote Controller Indicators

Remote Controller Display Indicators Explained

Explains the indicators shown on the remote controller's display.

Remote Controller Switching Functionality

Explains how to use the remote controller switching function.

Preparation and Initial Setup

Remote Battery Management

Instructions for inserting and replacing remote controller batteries.

Setting the Remote Controller Clock

Steps for setting the clock on the remote controller.

Remote Controller Usage

Signal Receiving Tones and Notifications

Explains the tones received from the indoor unit upon signal reception.

Basic Settings Recall Notification

Describes what happens when the 'beep-beep' tone is heard.

Automatic Operation Mode

Automatic Operation: Start and Stop

Details how to start and stop automatic operation mode.

Auto Changeover Operation

Auto Changeover: Start and Stop

Explains how to start and stop the auto changeover mode.

Cooling and Heating Operation

Cooling/Heating Operation: Start and Stop

Instructions for operating in cooling or heating modes.

Dry Operation Mode

Dry Operation: Start and Stop

Steps to start and stop the dry operation mode.

8°C Operation Mode

8°C Operation: Start and Stop

How to activate and deactivate the 8°C heating function.

Pure Operation (Air Purifying)

Pure Operation: Start and Stop

Instructions for activating and deactivating the air purifying function.

Hi Power Operation Mode

Hi Power Mode: Setting and Cancelling

How to set and cancel the high power operation mode.

Timer Operation

Setting ON/OFF Timers

Procedures for setting the timer to turn the unit on or off.

Combined Timer Operations

Combined Timer: OFF then ON

Setting the timer to stop and then restart the unit.

Combined Timer: ON then OFF

Setting the timer to start and then stop the unit.

Daily Combined Timer Setting

Setting ON and OFF timers to activate daily.

Memory and My Comfort Operation

Storing Settings (MEMO)

How to store frequently used operation settings.

Using Stored Settings (MY COMFORT)

How to recall and use stored settings.

Air Flow Direction Adjustment

Vertical Air Flow Direction Settings

How to set the vertical louvers manually or automatically.

Horizontal Air Flow Direction Settings

How to set the horizontal louvers manually or automatically.

Automatic Air Flow Swing Control

How to activate and control the automatic air flow swing function.

Auto Restart Operation

Setting Auto Restart Function

Instructions on how to enable the auto restart function.

Canceling Auto Restart Function

Procedures to disable the auto restart function.

Air Conditioner Operation Modes Explained

Automatic Operation Mode Explained

How the unit selects modes based on room temperature.

Hi Power Operation Explained

How Hi POWER mode adjusts cooling, heating, and fan speed.

Sleep Mode Operation Explained

How sleep mode controls temperature, airflow, and noise.

Dry Operation Mode Explained

How dry mode operates based on temperature differences.

Economical Operation Tips

Tips for Economical Operation

Advice for efficient and cost-effective air conditioner usage.

Temporary Operation Mode

Temporary Operation Usage

How to operate the unit when the remote is unavailable.

Cleaning Operation Mode

Cleaning Operation Details

Explains the purpose and duration of the cleaning cycle.

Usual Maintenance Procedures

Cleaning Indoor Unit and Remote Controller

Instructions for cleaning the indoor unit and remote controller.

Long-Term Storage Maintenance

Steps to take before storing the unit for extended periods.

Pre-Operation Checks

Pre-operation checks for proper functioning.

Air Filter Cleaning

Procedure and frequency for cleaning air filters.

Operation and Performance Details

Three-Minute Protection Feature

Explains the protection feature preventing immediate restarts.

Heating Operation Characteristics

Details preheating and warm air control during heating.

Defrosting Operation Process

Describes the automatic defrost process during heating.

Heating Capacity and Snow Management

Factors affecting heating capacity and snow accumulation.

Power Failure and Restart Procedure

How the unit behaves after a power failure and restart.

Recommended Operating Conditions

Recommended temperature and humidity ranges for operation.

Normal Operations and Observations

Explains normal occurrences like condensation, noises, and odors.

Indicator Lights and Operational Sounds

Explains PURE indicator behavior and various operational sounds.

Troubleshooting: Remote Controller

Remote Controller Operational Issues

Addresses problems with mode switching and fan speed control.

Remote Display and Timer Issues

Explains why the display might turn off or timer indicators disappear.

Signal Receiving Tone Issues

Troubleshooting no receiving tone from the indoor unit.

Technical Specifications

Specifications: Reverse Cycle Split Types

Technical specifications for various split type models.

Specified Performance Operating Conditions

Lists the conditions for specified cooling and heating performance.

EMC Directive Information

Manufacturer and EU Importer Details

Details manufacturer and EU importer contact information.

Related product manuals

Toshiba RAS-16PKVP-E

32 pages

Toshiba RAS-16PKVPG-E

17 pages

Toshiba RAS-16PKVSG-E

6 pages

Toshiba RAS-16PAVSG-E