10-2. Optional Parts, Accessories and Tools
10-2-1. Optional installation parts
<Fixing bolt arrangement of outdoor unit>
Part
Code
A
B
C
Q'ty
One
each
1
One
each
Parts name
Refrigerant piping
Liquid side : ∅6.35 mm
Gas side : ∅12.7 mm
Pipe insulating material
(polyethylene foam, 8 mm thick)
Putty, PVC tapes
FILE NO. SVM-12056
Fig. 10-2-1
Secure the outdoor unit with fixing bolts and nuts if the unit is likely to be exposed to a strong wind.
Use ∅ 8 mm or ∅10 mm anchor bolts and nuts.
·
·
If it is necessary to drain the defrost water, attach drain nipple 12 and cap water proof 13 to the
·
bottom plate of the outdoor unit before installing it.
∗ When using a multi-system outdoor unit is used, refer to the installation
manual provided with the model concerned.
∗ Drain nipple and cap water proof
are packed in outdoor unit.
Air inlet
Air outlet
Drain outlet
600 mm
90 mm
125 mm108 mm
28 mm
86 mm
102 mm
320 mm
25 mm
Æ
– 50 –
To Next Page
Loading...
