Need help?Do you have a question about the Toshiba RAS-18SAV-E and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-18SAV-E |
| Category | Air Conditioner |
| Language | English |
Precautions for installing air conditioners using the new R410A refrigerant.
Detailed specifications for indoor and outdoor units, including electrical characteristics and piping.
Information on outdoor units compatible with B**UFV-E series indoor units.
Graphs showing operating characteristics and capacity variation ratios.
Safety precautions for handling R410A refrigerant during installation and servicing.
Guidelines for installing refrigerant piping, including materials and joints.
List of essential tools for R410A installation and servicing.
Diagrams illustrating the construction and dimensions of the indoor unit.
Diagrams showing the construction and installation dimensions of the outdoor unit.
Electrical wiring diagram for specific indoor and outdoor unit models.
Electrical wiring diagram for specific indoor and outdoor unit models.
List of electrical components and their specifications for the indoor unit.
List of electrical components and their specifications for the outdoor unit.
Diagram illustrating the refrigerant flow for specific indoor and outdoor units.
Diagram illustrating the refrigerant flow for specific indoor and outdoor units.
Performance data for cooling operation under various temperature conditions.
Performance data for heating operation under various temperature conditions.
Block diagram showing the control functions and signal flow of the indoor unit.
Block diagram illustrating the control functions of the outdoor unit's inverter assembly.
Overview of the air conditioner's capacity-variable control system using DC motors.
Description of fundamental operational procedures and controls.
Details on how the indoor fan motor speed is controlled.
Explanation of the outdoor fan motor speed control mechanism.
Details on the automatic restart function after power failure.
Explanation of the remote control functions and operations.
Checks for unit not operating or low cooling/heating performance.
Procedure for selecting remote control A or B for multi-unit installations.
Steps to adjust the brightness of the indoor unit display panel.
Diagrams showing recommended placement and clearances for indoor and outdoor units.
Detailed steps for installing the indoor unit, including cutting holes and mounting.
Guidelines for installing the outdoor unit, including placement and cold weather precautions.
List of optional parts and accessories included with the unit for installation.
Details on new tools required for R410A installation and servicing.
Recommended locations and conditions for installing the indoor unit.
Procedures for cutting mounting holes and attaching the installation plate.
Step-by-step instructions for installing the indoor unit, including piping and wiring.
Specific instructions for installing the indoor unit in a concealed wall configuration.
Recommended locations and conditions for installing the outdoor unit.
Precautions for installing the outdoor unit in areas with snowfall and cold temperatures.
Procedures for draining water and connecting refrigerant piping for the outdoor unit.
Steps for evacuating the system, wiring connections, and electrical work.
Procedure for performing a gas leak test on the refrigerant system.
Procedure for selecting remote control A or B for multi-unit installations.
Steps to perform a temporary test run of the air conditioner.
Instructions for setting the auto restart function after a power failure.
General procedure for diagnosing troubles and precautions for inverter handling.
Checking power, voltage, and basic operation status.
Interpreting error codes indicated by indoor unit LED flashing patterns.
Using the remote controller in service mode to perform self-diagnosis and check codes.
Step-by-step diagnosis based on specific symptoms like no power or fan issues.
Procedure for removing and replacing the front panel of the indoor unit.
Steps for removing and replacing the electrical parts box assembly.
Diagram showing the layout of components on the indoor unit's P.C. board.
Procedures for disassembling and reassembling the outdoor unit's cabinets.
Exploded view and parts list for the indoor unit.
Exploded view and parts list for the outdoor unit.
Diagrams showing the component layout on P.C. boards for various models.
To Next Page