To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAS-3M26UAV-E and is the answer not in the manual?
General| Type | Air conditioner outdoor unit |
|---|---|
| Ionizer | - |
| Multi-split | Yes |
| Product color | White |
| Compressor type | Rotary |
| Built-in display | No |
| Air conditioner functions | Cooling, Heating |
| Cooling capacity in watts (max) | 9000 W |
| Cooling capacity in watts (min) | 4100 W |
| Heating capacity in watts (max) | 11200 W |
| Heating capacity in watts (min) | 2000 W |
| Cooling capacity in watts (nominal) | 7500 W |
| Cooling energy efficiency (EER, W/W) | 3.75 |
| Heating energy efficiency (COP, W/W) | 4.09 |
| Operating temperature (cooling) (T-T) | 10 - 43 °C |
| Operating temperature (heating) (T-T) | -15 - 22 °C |
| Energy efficiency class (cooling) | A |
| Power consumption (cooling) (min) | - W |
| Power consumption (heating) (max) | 2200 W |
| Hourly energy consumption (cooling) | - kWh |
| Indoor unit width | - mm |
| Indoor units quantity | 0 |
| Outdoor unit depth | 320 mm |
| Outdoor unit width | 900 mm |
| Outdoor unit height | 890 mm |
| Outdoor unit weight | 69000 g |
| Outdoor units quantity | 1 |
| Outdoor unit noise level | 63 dB |
| Cooling airflow (outdoor unit) | 2507 m³/h |
Explains symbols DANGER, WARNING, CAUTION and general safety rules for operation.
Details risks related to electric shock and proper electrical handling.
Covers safety aspects for unit installation, grounding, and wiring.
Provides guidance on cleaning, cable handling, and environmental usage conditions.
Instructions for safe handling, insertion, and disposal of remote control batteries.
Fully automated operation customized to regional consumer preferences.
Includes filter preparation, battery loading, and clock setup.
Manual adjustment for horizontal and automatic for vertical airflow direction.
Identifies buttons on the remote control for operation.
Automatically selects cooling, heating, or fan only operation based on conditions.
Manual selection and setting for cooling, heating, or fan-only modes.
For dehumidification with moderate cooling performance.
Activates plasma air purifier and air ionizer for air quality.
Controls temperature and airflow for faster cooling or heating.
Saves energy by automatically adjusting temperature settings.
Allows operation using the indoor unit button when the remote is lost.
Allows setting a specific time for the unit to turn on.
Allows setting a specific time for the unit to turn off.
Enables setting both ON and OFF timers that repeat daily.
Saves and recalls preferred operation settings for future use.
Automatically restarts the unit after a power failure.
Limits current consumption to 100%, 75%, or 50% for energy saving.
Automatically adjusts airflow and turns off the unit during sleep.
Maintains a minimum room temperature of 8°C during heating.
Instructions for filter reset and cleaning the air ionizer and plasma air purifier.
Runs the fan to reduce indoor unit moisture and prevent odors.
Details features like three-minute protection, preheating, and warm air control.
Specifies optimal outdoor and room temperatures for heating, cooling, and dry modes.
Checks for power, circuit breaker, and timer settings when the unit is off.
Troubleshoots issues like blocked filters, incorrect settings, or blocked vents.
Procedure to set a remote control for a second indoor unit in a dual system.
