To Next PageTo Next PageWhat should I do if my Toshiba RAS-3M18S3AV-E Air Conditioner displays an outdoor air temperature sensor (TO) error?
If the air conditioner displays an outdoor air temperature sensor (TO) error, check the outdoor air temperature sensor.
What to do if my Toshiba Air Conditioner has a high pressure switch error?
If there's a high pressure switch error, you should inspect the high pressure switch and related circuits. Another suggested solution is to reset the high pressure switch.
What to do if my Toshiba RAS-3M18S3AV-E compressor is locked?
If the compressor is locked, the suggested solution is to reset the compressor.
What to do if there is a fan system error in my Toshiba RAS-3M18S3AV-E Air Conditioner?
If you encounter a fan system error, check the fan operation and wiring.
What to do if my Toshiba RAS-3M18S3AV-E Air Conditioner shows a compressor system error?
If there is a compressor system error, check the compressor connections and functionality.
How to troubleshoot a miswiring error in my Toshiba RAS-3M18S3AV-E?
To address a miswiring (mispiping) check error, inspect the wiring and piping for any errors.
What should I do if my Toshiba Air Conditioner displays a gas pipe (unit A) temperature sensor (TGa) error?
If the air conditioner displays a gas pipe (unit A) temperature sensor (TGa) error, inspect the gas pipe temperature sensor (TGa).
What should I do if my Toshiba RAS-3M18S3AV-E Air Conditioner displays a suction temperature sensor (TS) error?
If the air conditioner displays a suction temperature sensor (TS) error, inspect the suction temperature sensor.
What to do if my Toshiba Air Conditioner shows a current detection circuit error?
If a current detection circuit error occurs, check the current detection circuit and sensors.
What to do if my Toshiba Air Conditioner has a compressor case thermostat error?
If you are experiencing a compressor case thermostat error, check the thermostat and wiring connections.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Type | Multi Split System |
Covers DANGER, WARNING, CAUTION symbols and definitions.
Details safety for R410A refrigerant, installation, and potential hazards.
Focuses on electrical work, wiring, grounding, and general installation safety.
Explains how to cut, flare, and connect refrigerant pipes.
Details vacuum pump procedures and gas leak inspection.
Covers R410A properties, labels, and safe handling.
Details gas leak checks and refrigerant pipe insulation.
