Toshiba RAS-B13EKVP-E - Product Specifications; Model and Power Specifications; Air-Conditioning Performance Conditions

27 EN
ENGLISHFRANÇAISDEUTSCHITALIANOESPAÑOLΕΛΛΗΝΙΚΗPORTUGUÊS###SW######RU###
• These specifications are subject to change without notice for the purpose of incorporating technical improvements.
The specified air-conditioning performance is based on the data determined under the following conditions.
For details on the specifications when used in combination with a multi air conditioner outdoor unit, refer to the specifications table
provided with the multi air conditioner outdoor unit.
SPECIFICATIONS
Ty pe Reverse cycle, Split type
Model Indoor Unit Outdoor Unit Indoor Unit Outdoor Unit
RAS-B10EKVP-E RAS-10EAVP-E RAS-B13EKVP-E RAS-13EAVP-E
Power supply 220 – 240 V~, 50 Hz
220 V~, 60 Hz
220 – 240 V~, 50 Hz
220 V~, 60 Hz
Cooling capacity (kW) CAPA. 2.5 3.5
Heating capacity (kW) CAPA. 3.2 4.2
Cooling current (A) AMP. 0.15 2.48 – 2.26 0.15 4.25 – 3.89
Cooling power (W) WATT. 30 520 30 890
Heating current (A) AMP. 0.15 3.25 – 2.96 0.15 4.52 – 4.13
Heating power (W) WATT. 30 680 30 1,060
Dimensions
Width (mm) 790 780 790 780
Height (mm) 250 550 250 550
Depth (mm) 215 290 215 290
Net weight (kg) 9 35 9 37
Ty pe Reverse cycle, Split type
Model Indoor Unit Outdoor Unit
RAS-B16EKVP-E RAS-16EAVP-E
Power supply 220 – 240 V~, 50 Hz
220 V~, 60 Hz
Cooling capacity (kW) CAPA. 4.5
Heating capacity (kW) CAPA. 5.5
Cooling current (A) AMP. 0.15 6.45 – 5.90
Cooling power (W) WATT. 30 1,350
Heating current (A) AMP. 0.15 7.07 – 6.47
Heating power (W) WATT. 30 1,480
Dimensions
Width (mm) 790 780
Height (mm) 250 550
Depth (mm) 215 290
Net weight (kg) 9 37
For cooling For heating
(
heat pump models
)
Air inlet temperature °C
Indoor coil assembly Outdoor coil assembly
Dry bulb Wet bulb Dry bulb Wet bulb
27 19 35 24
Air inlet temperature °C
Indoor coil assembly Outdoor coil assembly
Dry bulb Wet bulb Dry bulb Wet bulb
20 — 7 6