EasyManua.ls Logo

Toshiba RAV-GM1102ATW-E User Manual

Toshiba RAV-GM1102ATW-E
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AIR CONDITIONER (SPLIT TYPE)
Installation Manual
Outdoor Unit
Model name:
<Single-phase model>
RAV-GM802ATW-E
RAV-GM902ATW-E
RAV-GM1102ATW-E
RAV-GM1402ATW-E
RAV-GM1602ATW-E
<Three-phase model>
RAV-GM1102AT8W-E
RAV-GM1402AT8W-E
RAV-GM1602AT8W-E
R32
English
For commercial use
Question and Answer IconNeed help?

Do you have a question about the Toshiba RAV-GM1102ATW-E and is the answer not in the manual?

Toshiba RAV-GM1102ATW-E Specifications

General IconGeneral
BrandToshiba
ModelRAV-GM1102ATW-E
CategoryAir Conditioner
LanguageEnglish

Summary

Warning Indications on Air Conditioner Unit

Electrical Shock Hazard Warning

Warns to disconnect power before servicing to prevent electric shock.

Moving Parts Warning

Warns not to operate unit with grille removed and to stop unit before servicing.

Cautionary Warnings

Warns about high temperature parts, aluminum fins, and burst hazards.

General Safety Precautions

General Installation Safety

Emphasizes reading manual, qualified installers, and general handling safety.

Electrical Work Safety

Test Run Safety and Procedures

Outlines test run preparation, checks, operation, and troubleshooting.

R32 Refrigerant Air Conditioner Installation

R32 Refrigerant Installation Guidelines

Emphasizes R32 specific tools, piping, and contamination prevention.

Required Tools and Equipment for Installation

Lists necessary tools and equipment with usage notes.

Installation Conditions

Airtight and Air Purge Procedures

Guides for airtight testing and air purging using vacuum pump.

Refrigerant Piping Installation

Pipe Flaring and Connection Tightening

Connecting Part Tightening Cautions

Details correct tightening for valves and connecting parts, with cautions.

Air Purging Procedures

Airtight Test and Gas Leak Check

Guides for airtight testing and gas leak inspection procedures.

Refrigerant Replenishing

Refrigerant Replenishing Procedure

Details the steps for adding refrigerant to the system.

Additional Refrigerant Charging Calculation

Provides formulas for calculating additional refrigerant for various system types.

Gas Leak Inspection and Pipe Insulation

HFC Refrigerant Leak Detection

Explains the use of specialized detectors for HFC refrigerants.

Electrical Work Safety and Procedures

Electrical Wiring and Earthing

Covers electrical wiring, earthing, circuit breakers, and qualified personnel.

Wiring Connection Guide

Wiring Diagrams

EMC Clamp Filter and Earthing

Earthing Installation and Safety

Reiterates the importance of proper earthing for shock prevention.

Test Run Procedure

Test Run Preparation and Safety

Details pre-test run steps and compressor protection.

Test Run Operation and Checks

Outlines pre-test run checks, mode operation, and refrigerant leak detection.

Refrigerant Recovery and Existing Piping Support

Refrigerant Recovery Steps

Detailed step-by-step procedure for recovering refrigerant.

Troubleshooting Guide

LED Displays and Check Codes

Explains LED indicators and check codes for fault diagnosis.

Appendix: Existing Piping Details

Warnings on Refrigerant Leakage

Refrigerant Concentration Limit

Explains the concentration limits for refrigerant in rooms to prevent suffocation.

Related product manuals