What to do if my Toshiba RAV-GV1601ATP-E reports a heat exchanger temperature sensor (TL) error?
If your Toshiba Air Conditioner reports a heat exchanger temperature sensor (TL) error, check the heat exchanger temperature sensor and replace it if faulty.
Why is the indoor fan not rotating on my Toshiba RAV-GV1601ATP-E Air Conditioner?
The indoor fan of your Toshiba Air Conditioner may not rotate if the cool air discharge prevention control is active during heating operation.
What to do if my Toshiba Air Conditioner compressor breaks down?
If your Toshiba Air Conditioner's compressor breaks down, you should inspect it for faults and replace it if it is defective.
What to do if my Toshiba RAV-GV1601ATP-E Air Conditioner compressor is locked?
If the compressor of your Toshiba Air Conditioner is locked, check for overload conditions and reset the compressor.
How to fix a Toshiba RAV-GV1601ATP-E Air Conditioner fan system error?
To address a fan system error in your Toshiba Air Conditioner, inspect the fan system and replace any faulty components.
What to do if my Toshiba RAV-GV1601ATP-E Air Conditioner detects a gas leak?
If your Toshiba Air Conditioner detects a gas leak, locate and repair the gas leak.
What to do if my Toshiba RAV-GV1601ATP-E Air Conditioner has a case thermostat operation issue?
If your Toshiba Air Conditioner has a case thermostat operation issue, check the case thermostat and replace it if faulty.
What to do if my Toshiba RAV-GV1601ATP-E reports an outside air temperature sensor (TO) error?
If your Toshiba Air Conditioner reports an outside air temperature sensor (TO) error, check the outside air temperature sensor and replace it if faulty.
What to do if my Toshiba RAV-GV1601ATP-E reports a heat exchanger temperature sensor (TE) error?
If your Toshiba Air Conditioner is showing a heat exchanger temperature sensor (TE) error, check the heat exchanger temperature sensor and replace it if faulty.
What to do if my Toshiba Air Conditioner shows a current detection circuit error?
If your Toshiba Air Conditioner displays a current detection circuit error, inspect current detection components and replace faulty components in the detection circuit.
General| Type | Split System |
|---|---|
| Cooling Capacity | 16.0 kW |
| Heating Capacity | 18.0 kW |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.5 |
To Next Page
