Why is my Toshiba RAV-HM901KRTP-E showing an indoor unit fan error?
If you encounter an indoor unit fan error with your Toshiba Air Conditioner, this indicates that the indoor AC fan has an error, and the fan motor thermal relay may be activated. This can be caused by the indoor fan motor or the indoor P.C. board.
What does indoor unit room temp sensor (TA) error mean on Toshiba Air Conditioner?
If your Toshiba Air Conditioner displays an error related to the indoor unit room temperature sensor (TA), it means an open-circuit or short-circuit was detected in the room temperature sensor (TA). This could be due to a problem with the room temperature sensor (TA) or the indoor P.C. board.
What causes outdoor unit temp sensor (TE / TS) error on Toshiba Air Conditioner?
If your Toshiba Air Conditioner displays an error related to the outdoor unit temperature sensor (TE / TS), it means that an open-circuit or short-circuit has been detected in the heat exchanger temperature sensor. This can be caused by the outdoor temperature sensors (TE / TS) or the outdoor P.C. board.
What does indoor unit heat exchanger sensor (TC) error mean in Toshiba RAV-HM901KRTP-E?
If your Toshiba Air Conditioner is showing an indoor unit heat exchanger sensor (TC) error, it means an open-circuit or short-circuit of the heat exchanger sensor (TC) was detected. This could be caused by the heat exchanger sensor (TC) or the indoor P.C. board.
Why is my Toshiba RAV-HM901KRTP-E showing an indoor unit heat exchanger sensor (TCJ) error?
If your Toshiba Air Conditioner displays an indoor unit heat exchanger sensor (TCJ) error, this indicates that an open-circuit or short-circuit of the heat exchanger sensor (TCJ) was detected. The cause may be the heat exchanger sensor (TCJ) or the indoor P.C. board.
What causes header unit follower unit regular communication error on Toshiba RAV-HM901KRTP-E?
If your Toshiba Air Conditioner displays a header unit follower unit regular communication error, regular communication is not possible between header and follower indoor units or between twin header (main) and follower (sub) units. This is possibly due to the indoor P.C. board.
Why Toshiba RAV-HM901KRTP-E remote controller transmission error?
If your Toshiba Air Conditioner shows a remote controller transmission error, no signal can be sent to the indoor unit. Possible causes: Indoor / Outdoor connecting wires, indoor P.C. board, remote controller.
What does indoor unit-remote controller regular communication error mean for Toshiba Air Conditioner?
If your Toshiba Air Conditioner displays an indoor unit-remote controller regular communication error, it means no data is received from the remote controller or network adapter. This issue may be related to the remote controller, network adapter, or indoor P.C. board.
What does duplicated header remote controllers mean on Toshiba RAV-HM901KRTP-E Air Conditioner?
If your Toshiba Air Conditioner shows duplicated header remote controllers, it is because two remote controllers are set as header in the double-remote controller control. This is due to a remote controller address setting error.
What causes duplicated indoor addresses on Toshiba RAV-HM901KRTP-E Air Conditioner?
If your Toshiba Air Conditioner displays duplicated indoor addresses, it means the same address as the self-address was detected due to an indoor address setting error.
General| Brand | Toshiba |
|---|---|
| Model | RAV-HM901KRTP-E |
| Category | Air Conditioner |
| Language | English |
Covers general safety guidelines for operating the air conditioner, including installation by qualified personnel and proper use.
Details on safe installation practices, including electrical work, circuit breaker settings, and handling refrigerants.
Guidelines for safe operation, including avoiding high-voltage parts, working at heights, and cleaning procedures.
Procedures and warnings related to air conditioner repairs, emphasizing contacting qualified service personnel and circuit breaker safety.
Information on safe relocation of the unit and installation requirements, including power supply and fixing the outdoor unit.
Identification and labeling of components within the indoor unit of the air conditioner.
Explanation of the display panel indicators and controls on the indoor unit.
Overview of the wireless remote controller and its various buttons and functions.
How to operate the air conditioner for cooling, heating, or fan-only modes using the remote.
Setting and cancelling ON/OFF timers using the remote controller.
Step-by-step guide for removing and cleaning the air filters.
Common issues to check before requesting professional repair for inoperative units.
Troubleshooting steps for reduced cooling or heating efficiency.
Places to avoid for installation to prevent malfunction or damage.
To Next Page
