What to do if the filter of my Toshiba RAV-HM801CTP-E Air Conditioner is contaminated?
If the filter of your Toshiba Air Conditioner is contaminated with dust or dirt, wash it with water. If the filter is damaged, replace it.
How to resolve drain pan clogging in my Toshiba RAV-HM801CTP-E Air Conditioner?
If the drain pan of your Toshiba Air Conditioner is clogged or contaminated with dust or dirt, clean the drain pan and make sure that there is a slope for smooth drainage.
How to clean ornamental panel of Toshiba Air Conditioner?
If the ornamental panel or louvers of your Toshiba Air Conditioner are contaminated due to dust, dirt, or scratches, wash them. For scratches, consider applying a repair coating.
How to fix a clogged heat exchanger in my Toshiba RAV-HM801CTP-E Air Conditioner?
If the heat exchanger of your Toshiba Air Conditioner is clogged due to dust or dirt, washing it should resolve the issue.
How to repair exterior rust on my Toshiba Air Conditioner?
If the exterior of your Toshiba Air Conditioner has rust or peeling paint due to rust, peeling insulator, or coat lift, apply a repair coating.
General| Cooling Capacity | 8.0 kW |
|---|---|
| Heating Capacity | 9.0 kW |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 52 dB(A) |
| Type | Split |
| Indoor Unit Noise Level | 45 dB(A) |
Details the qualifications and knowledge required for a qualified installer.
Details the qualifications and knowledge required for a qualified service person.
Specific safety precautions to be followed during the installation process.
Critical safety rules to observe during the air conditioner's operation.
Safety procedures for performing maintenance and repairs on the unit.
Details the names and functions of the remote controller's buttons and display.
Explains the meaning of various icons displayed on the remote controller.
Steps to start the unit and select an operation mode (Auto, Heat, Dry, Cool, Fan).
Instructions for setting the timer to automatically turn off the unit.
Safety warnings for cleaning in high places and operating controls with wet hands.
Steps to take when encountering operational issues or error codes.
Specifies locations to avoid for proper installation and performance.
To Next Page
