–24–
Owner’s Manual
EN
To copy the settings of the previous day
• Push the [ CANCEL] button to stop the setting. No setting has been made and the screen returns to the
“Schedule timer” screen.
• *“Auto” is displayed only when dual automatic mode is selected.
Holiday setting
* Set the days of the week when the schedule timer is not used.
• Operations other than the Schedule timer, such as operations on the remote controller or using the central control
are available on the days set as “Holiday”.
• Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to
the “Schedule timer” screen.
1 Push the [ MONITOR] button on the day
selection screen.
2 Push the “ Yes” [ F1] button.
The schedule of the previous day is copied.
Push the “
No” [ F2] button to
return to the Schedule timer setting screen. (4)
1 Push the [ ∧] / [ ∨] button to select
“3. Holiday setting” on the “Schedule timer”
screen.
2 Push the “ Set” [ F2] button.
3 Push the “ Day” [ F1] button to
select the day, then push the “
Set” [
F2] button to set.
Push the “ Set” [ F2] button so
that “” is displayed on the day when the
Schedule timer is not used.
4 Push the [ MENU] button.
The screen returns to the “Schedule timer”
screen.
Schedule timer1 (1/3)
Reset
Day
1.
ON
10 :22
23 °C
2.
--
--
:
--
--
°C
3.
--
--
:
--
--
°C
4.
--
--
:
--
--
°C
Return Fix
: Tuesday
(4)
No
Copy the previous
day setting?
Yes No
Schedule timer
Return
Schedule timer
1.Schedule timer
ON / OFF
2.Condition setting
Return Fix
3.Holiday setting
1 / 2/ 3
Set
Set
Day
Set
Holiday setting
Day Set
Return Fix
Mon Tue
Wed
Thu Fri Sat Sun