To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RBC-AMTU31-E and is the answer not in the manual?
General| Model | RBC-AMTU31-E |
|---|---|
| Brand | Toshiba |
| Quantity | 1 |
| Color | White |
| Type | Remote Control |
| Compatible Devices | Toshiba Air Conditioners |
Safety instructions for installing the air conditioner, emphasizing professional installation.
Precautions for safe operation, like avoiding wet hands and water contact.
Advice for safely moving and reinstalling the remote controller unit.
Warnings regarding installation locations like high moisture, heat, or noise sources.
Cautions about dropping, impact, and use in areas with children.
Details of the indicators and elements shown on the remote controller's display.
Identification of the buttons on the remote controller and their functions.
Explains displays for unit number, power saving, temperature, modes, timers, and errors.
Covers indicators for filter, test run, service, notice codes, and ventilation.
Steps for turning the unit on/off and selecting the operation mode.
How to select and adjust the fan speed for optimal airflow.
Usage of the Timer Set and Filter Reset buttons.
Information on using the remote controller's built-in temperature sensor.
Initial setup steps including turning on the power switch.
How to start, stop, and select modes for basic air conditioner operation.
Process for adjusting the fan speed according to user preference.
Guide on increasing or decreasing the desired temperature.
Steps to enable and disable the energy-saving power save operation.
Instructions for setting OFF timer, Repeat-OFF timer, and ON timer.
Procedure to deactivate or cancel an active timer setting.
How to adjust the louver to direct airflow for heating or cooling.
Steps to start, stop, or manage the automatic louver swing function.
How to select specific indoor units for individual louver control.
Procedure for selecting specific louvers on 4-way cassette units.
Guide on setting different swing patterns like standard, dual, or cyclic.
How to confirm the direction of the selected louver after setting.
Explanation of standard and dual swing movements for louvers.
Description of the cyclic swing pattern for louver movement.
Steps to lock louvers in a specific direction.
How to choose the fixed direction for the louvers.
How to activate and deactivate the power saving mode for energy efficiency.
Guide to configure specific power saving levels for outdoor units.
Procedure for manually setting the address for indoor units.
Detailed steps for specifying "CODE No." and "SET DATA" for indoor units.
How to set group addresses for multiple indoor units.
Verifying address changes and clearing settings.
Procedure to set the DN (Device Network) code for indoor units.
Steps to perform a test run operation of the air conditioner unit.
How to check for problems and display indoor unit error codes.
Detailed procedure to confirm stored check codes for troubleshooting.
Instructions for cleaning air filters when the filter indicator is displayed.
