–45–
Owner’s Manual
• This function can only be used with corresponding indoor units and outdoor units.
It cannot be used when incompatible models are included in the group connected to the remote controller.
“ No Function” appears.
Compatible models
Indoor unit: RAV-GM series, RAV-RM series
Outdoor unit: RAV-GP series
• The power consumption will not appear when the Air to Air Heat Exchanger and Ventilation unit are inside the group.
• Graph data is updated every 30 minutes.
• The power consumption displayed is just an estimate as it is calculated simply. It may sometimes differ from the result
measured by the power meter.
• Do not use the values of display for considering the contracted power and calculating the power charge.
• Data is displayed at that time during the summer time period.
• When a power failure occurs, data for up to 30 minutes before the power failure will not be displayed.
• When setting data for the indoor unit is checked and/or changed, data for that period of time may not be displayed.
• When using the air conditioner in two remote controllers, this function cannot be used with the sub (follower) remote
controller.
• Always set the clock before using this function.
• The display will return to the menu screen if the remote controller is not operated for approx. 60 seconds.
To Next Page
Loading...
