Toshiba RBC-AMSU51 -EN - Reset Power Consumption Data; Notice History

–32–
EN
Installation Manual
8. Reset power consumption data
Power consumption data saved in the remote controller can be reset.
9. Notice history
List of latest 10 notice data: information of check code, date, time, and unit, is displayed.
Deleting the notice history
1 Push the [ ∧ ] / [ ∨ ] button to select
“8. Reset power consumption data” on the
“Field setting menu” screen, then push the
“ Set” [
F2] button.
2 To reset the power consumption data, push
the “ Yes” [
F1] button.
Data is reset and the display returns to the
“Initial setting” screen.
1 Push the [ ∧ ] / [ ∨ ] button to select
“9. Notice history” on the “Field setting
menu” screen, then push the “
Set” [
F2] button.
List of latest 10 notice data is displayed.
* The oldest data are deleted in order to record
the new ones.
The date and time when the check code
occurred for the first time is displayed for the
repeated notice.
1 Push the “ Reset” [ F2] button
while the list of Notice history is displayed.
2 Push the “ Yes” [ F1] button
after the confirmation screen is displayed.
Delete the Notice history in each remote
controller when the dual remote controller
system is used.
Return
NoYes
Reset power consumption data
May I really reset data?
B3
Set
Yes
6.Setting timer operation mode
7.DN setting
9.Notice history
8.Reset Power Consumption data
Field setting menu(2/2)
Return
Set
Set
Unit Code Date Time
1. 1–2 101 31/12/2021 12:25
2. – – – –
3. – – – –
4. – – – –
Notice history
Return
Reset
Return
Reset all notice data.
NoYes
Notice history
B3
Reset
Yes