Toshiba RS-TX20 - Page 27

19
Watching One Channel & Recording Another
1
Cable with a Cable Box
 Connect the cable from the wall to the input jack of an RF splitter (not included).
 Connect an RF Coaxial cable from one of the splitter’s outputs to the RF In jack on
your cable box. Connect another RF Coaxial cable from the splitter’s other output to
the Antenna/RF In jack on your TV.
 Connect a Composite A/V cable from the Audio/Video Output jacks on the cable box
to the Audio/Video Input 1 jacks on the back of the DMS.
 Connect a Composite A/V cable from the Audio/Video Output jacks on the DMS to
the Audio/Video Input jacks on your TV.
 Connect the phone cord (see page 8). After you complete Guided Setup, you can
connect your DMS to a home network and use a broadband Internet connection instead
of a phone line to connect to the TiVo service. See Chapter 8.
For this setup,
use cable bags and .
The audio/video cables shown here are for
example only. For help choosing cables,
see page 4.
This setup requires an RF splitter.
Y
ou can purchase one at a local
electronics store.
®
IN
OUT
OUT
Antenna
In
INPUT
VIDEORL
®
Digital Media
Server
Television
RF Splitter
(not included)
IN
OUT
OUT
2
5
1
4
6
RF In
AUDIO/VIDEO
OUT
RF Out
PhoneSerial
Cable Box
2
3
6