User's Manual TSETUP and Passwords 7-11
Version
1
Last Saved on 30/04/00 19:48
Satellite 2750/2770 User's Manual – Satellite 2750 UK.doc – ENGLISH – Printed on 30/04/00 as
IM_275UK
Level 2 Cache
Use this feature to enable or disable the level 2 cache. This option is
activated only when the CPU cache is enabled. Disabling the CPU cache
also disables this feature.
Enabled
Enables the level 2 cache. (Default)
Disabled
Disables the level 2 cache.
Processor Serial Number
Use this feature to enable or disable the ability of a remote location to read
your processor’s serial number.
Processor Serial Number = Disabled
(Default)
Processor Serial Number = Enabled
This item appears under the following conditions:
A supervisor password is set, but a user password is not set.
If a supervisor password and a user password are both set and the
user password is used to log onto the computer, this item will appear if
no restriction is placed on the user password.
Dynamic CPU Frequency mode
This option lets you choose from the following settings:
Dynamically
Switchable
Enables the Intel® SpeedStep™ technology with
the Pentium® III processor.
Always High
Disables the Intel® SpeedStep™ technology with
the Pentium® III processor, and always runs the
processor at its maximum speed.
Always Low
Disables Pentium® III processor featuring Intel®
SpeedStep™ technology and always runs the
processor at its default speed.
To Next Page
Loading...
