User’s Manual 7-1
Chapter 7
HW Setup and Passwords
This chapter explains how to use TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
TOSHIBA HW Setup allows you to configure settings for General,
Password, Display, Boot Priority, Keyboard, USB, LAN and LED
Illumination.
Accessing HW Setup
Start, point to All Programs, point to TOSHIBA, point to Utilities and click
HWSetup.
HW Setup Window
The HW Setup window contains the following tabs: General,
Password,Display, Boot Priority, CPU, Keyboard, LAN, and USB.
There are also these three buttons:
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to the
computer.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
To Next Page
Loading...
