User’s Manual 4-11
Operating Basics
Loading discs
To load CD/DVD's, follow the steps as listed below and refer to figures 4-4
to 4-6.
1. When the computer's power is on, press the eject button to open the
disc tray slightly.
Figure 4-3 Pressing the eject button
2. Grasp the disc tray gently and pull until it is fully opened.
Figure 4-4 Pulling the disc tray open
Use the DVD playback application to view DVD-Video discs.
Eject holeEject buttonDisc tray LED
To Next Page
Loading...
