User’s Manual 7-5
HW Setup and Passwords
Built-in LAN
This feature enables or disables the Built-in LAN.
illumination
illumination ON/OFF
This feature allows you to set conditions for Front Edge Logo LED,
touchpad illumination LED and Function button backlight LED. (Depending
on the model you purchased)
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN (Default).
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Enabled Enables Built-in LAN function (Default).
Disabled Disables Built-in LAN function.
ON On. (Default)
OFF Off.
To Next Page
Loading...
