User’s Manual 6-14
Power and Power-Up Modes
5. Slide and hold the battery release latch(2) to free the battery pack after
moving the battery release latch(1) into its unlock position - then slide
the battery pack out of the computer.
Releasing the battery pack
Installing the battery pack
To install a battery, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Insert the battery pack.
Battery pack
Battery release latch(2)
Battery release latch(1)
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.
■ The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
■ Do not touch the latch while holding the computer. Or you may get
injured by the dropped battery by unintentional release of the latch.
To Next Page
Loading...
Need help?
General