User’s Manual 4-4
Operating Basics
Loading discs
To load CD/DVDs, follow the steps below and refer to the figures.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
Pressing the DVD-ROM eject button
b. Pressing the eject button will not open the drawer when the DVD-
ROM drive’s power is off. If the power is off, you can open the
drawer by inserting a slender object (about 15 mm) such as a
straightened paper clip into the eject hole just to the right of the eject
button.
Manual release with the eject hole
2. Grasp the drawer gently and pull until it is fully opened.
Pulling the drawer open
Eject button
15mm
Diameter 1.0mm
To Next Page
Loading...
