4 Replacement Procedures 
Satellite A660/ProA660 Series Maintenance Manual  4-33 
4.11  Fingerprint Scanner Bracket 
Removing the Fingerprint Scanner Bracket 
Remove the fingerprint scanner bracket according to the following procedures and Figures 4.23, 
4.24 and 4.25. 
1.  Turn the logic upper assembly upside down. 
2.  Use your fingers to press and hold down the wings on either side of the fingerprint 
scanner bracket as shown in Figure 4.23.  
 
Figure 4.23 Raising the fingerprint scanner bracket from the logic upper assembly