Toshiba Satellite A665 Series - EEPROM Setting

3 Tests and Diagnostics
Satellite A660/A665 Series Maintenance Manual
41
3.21 EE--PROM Setting
This EE-PROM SETTING will set the computer’s function status into EEPROM, included
supported function and no support function.
NOTE: Should perform EE-PROM SETTING once change M/B. It defined as normal rule.
The screen should display as below:
a. Set MIC Function Status in EEPROM (Disable/Enable)
b. Set HDMI Function Status in EEPROM (Disable/Enable)
c. Set CIR Function Status in EEPROM (Disable/Enable)
d. Set Felica card Function Status in EEPROM (Disable/Enable)
e. Set KBLED Function Status in EEPROM (Disable/Enable)
f. Set Speaker EQ status in EE-PROM (Harman 2 Speaker/ No brand 2 Speaker)
g. Set and Check SKUID Status(Set/Check)
h. Set Front Edge logo status in EE-PROM (Disable/Enable)
i. Set Wimax function status in EE-PROM (Disable/Enable)
j. Set JET function flag in EE-PROM (Disable/Enable)
k. Set 3G function flag in EE-PROM (Disable/Enable)
l. Set NON_OS language in EE-PROM (NONEOS/ HAVEOS)
m. Set BIOS language in EE-PROM (English/Japanese/French)
n. Set No Function Disable
o. Back To Test Title