2Troubleshooting Procedures 
Satellite A660/A665 Series Maintenance Manual  
2.28  3G Troubleshooting 
START
Perform Windows application test
(Procedure 1)
Was a 3G  problem detected?
Perform system info and electric wave check
(Procedure 2)
Replace 3G  antenna/unit
Replace system board
END
Yes
3G system is not
faulty. Continue
troubleshooting - refer
to Figure 2.1
No
 
Figure 2-27 3G troubleshooting process 
 
Notes: 3G Antenna assemble rule as below: 
 
The 3G antenna wire, 3G unit or system board may each be the source of a 3G fault. Any of 
these components may be damaged. To determine if the computer’s wireless LAN system is 
functioning properly, perform the following procedures. Figure 2-27 outlines the process. 
Start with Procedure 1 and continue with the other procedures as instructed. 
Procedure 1:  Windows Application check