4 Replacement Procedures 4.6 Keyboard
4-20 Satellit /Satellite Pro /C850D/C855D /L850D/L855D Maintenance Manual
Installing the Keyboard
Install the keyboard according to the following procedures and Figure 4-8.
1. Connect the keyboard cable to CN250 on the system board.
2. Place the keyboard cover in the correct position and secure the following 14 latches,
in that order:
- One latch on right side and one latch on left sides.
- Six front latches.
- Press located boss to fix at top support.
- Six bottom latches.
To Next Page
Loading...
