To disconnect and remove the computer from the keyboard dock, do the
following:
Failure to follow the procedures below may result in data loss.
1. Disconnect and remove all peripheral devices and cables connected
to the computer.
2. Press down the release button while holding the middle-top side of the
display panel first and then lift it to release it from the computer holder
and completely off the keyboard dock.
Figure 2-3 Removing the computer from the keyboard dock
1. Release button
Product appearance depends on the model you purchased.
Do not undock the computer if the remaining power of Battery (refers
to the battery pack inside the tablet) is 10% or less. To check the
remaining battery power, click the battery icon on the Windows
taskbar.
Do not dock the computer immediately after undocking operation. Wait
at least 5 seconds.
Connecting the AC adaptor
Attach the AC adaptor when you want to charge the battery or operate from
AC power. The battery pack must be charged before you can operate from
battery power.
The AC adaptor can automatically adjust to any voltage ranging from 100
volts to 240 volts and to a frequency of either 50 hertz or 60 hertz, enabling
you to use this computer in almost any country/region. The adaptor
User's Manual
2-5
To Next Page
Loading...
Need help?
General