As the port operation of all HDMI display devices have not been
confirmed, some HDMI display devices might not function properly.
To connect a device to the HDMI out port, you must purchase a
suitable HDMI cable.
1. Plug one end of the HDMI cable into the HDMI in port of the HDMI
display device.
2. Plug the other end of the HDMI cable into the HDMI Micro port on your
computer.
3. Turn the HDMI display device's power on.
Figure 4-7 Connecting the HDMI cable (laptop mode)
Figure 4-8 Connecting the HDMI cable (tablet mode)
1. HDMI Micro port
2. HDMI cable (Type D connector)
Product appearance depends on the model you purchased.
Do not plug/unplug an HDMI device under the following conditions:
The system is starting up.
The system is shutting down.
When you connect a television or external monitor to the HDMI Micro port,
the display output device is set to HDMI.
When you unplug the HDMI cable and replug it, wait at least 5 seconds
before you replug the HDMI cable again.
User's Manual 4-15
To Next Page
Loading...
Need help?
General