User’s Manual 3-7
Getting Started
Turning on the power
This section describes how to turn on the power.
1. If a USB Floppy Disk drive is connected, make sure the drive is empty.
If a diskette is in the drive, press the eject button to remove it.
2. Press the Power button.
Turning on the power
Starting up for the first time
When you first turn on the power, the computer's initial screen is the
Windows
®
XP Startup Screen Logo. Follow the on-screen directions.
During setup, you can click the Back button to return to the previous
screen.
Be sure to read the Windows
®
Operating System End User License
Agreement carefully.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Starting up for the first
time in this chapter.
To Next Page
Loading...
