3-12 User’s Manual
Getting Started
Creating an Express Media Player Recovery CD *
A recovery image of Express Media Player is stored on the hard disk. You
Select blank CD.
1. Select blank CD.
2. The application will allow you to choose a type of media to create
recovery CD including: CD-R, CD-RW.
3. Turn on your computer to open Windows XP.
4. Insert the (first) blank media into the tray of the Optical Drive.
5. Double click the Recovery Disc Creator icon on the Windows
®
XP
desktop, or Select the application from Start Menu.
6. After Recovery Disc Creator starts, select the type of media and the title
you wish to copy to the media then click the Burn button.
* indicates an optional part is dependant on the model purchased.
Some media may not be compatible with the Optical Drive of your
computer. Please verify your Optical Drive supports the blank media you
choose.
RecordNow! Basic for TOSHIBA is required to create the Recovery Discs.
Other disc writing software is not supported.
Please boot Express Media Player once before making recovery CD. If its
recovery image is outdated, the following message is displayed.
The Express Media player had detected that its recovery image is
outdated. Express Media player is creating a recovery image now. Do not
shutdown the system until this message is closed by the program. Toshiba
recommends that you create a recovery CD for Express Media player for
future use, by using the Recovery Disc Creator on your Windows desktop.
To Next Page
Loading...
