EasyManua.ls Logo

Toshiba SD-2300 - Connecting to an Amplifier Equipped with a Dolby Digital Decoder; Connecting to an Amplifier Equipped with Dolby Pro Logic Surround

Toshiba SD-2300
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Connections
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an
amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s
owner’s manual and set the amplifier so you can enjoy Dolby Pro Logic
Surround sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential unpublished
works. ©1992-1997 Dolby Laboratories.
All rights reserved.
Use DVD video discs encoded via
the Dolby Digital recording
system.
Make the following setting.
Be sure to set “Audio Out Select”
to “Analog 2ch” when you enjoy
sounds of Dolby Pro Logic
Surround using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
Make the following setting.
On-screen display Select:
Page
“Bitstream”
“Audio Out Select”
Recording system
On-screen display Select:
“Analog 2ch”“Audio Out Select”
Amplifier equipped
with Dolby Pro Logic
Surround
To audio input
Audio cable
*
To ANALOG
AUDIO OUT
Amplifier equipped
with a Dolby Digital
decoder
75 coaxial cable
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a
Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic
from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
Connecting to an amplifier equipped with Dolby Pro Logic Surround
D
Page
BITSTREAM/
PCM
L
ANALOG
R
VIDEO Y P
B
P
R
S
AUDIO OUT
VIDEO OUT
BITSTREAM/
PCM
L
ANALOG
R
VIDEO Y P
B
P
R
S
AUDIO OUT
VIDEO OUT
56
58
56
58
42
To digital audio input
To BITSTREAM/PCM AUDIO OUT

Table of Contents

Related product manuals