EasyManua.ls Logo

Toshiba SD-2300 - Basic Playback Playing a Disc; Basic Playback

Toshiba SD-2300
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Basic playback
Preparations
When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD video player.
1
2
3
4
DVD display
POWER indicator
Press POWER.
The DVD video player turns on and
the POWER indicator on the player
illuminates.
When the DVD video player is turned on for
the first time, a message appears. Press
ENTER, and make the proper settings before
proceeding to step 2.
63
Press OPEN/CLOSE.
The disc tray opens.
Place a disc on the disc tray.
With the playback
side down.
There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out
of the guide, it may damage the disc and cause the
DVD video player to malfunction.
Do not place a disc which is unplayable in this
DVD video player.
Press OPEN/CLOSE to close the disc
tray.
Playback starts.
If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
using the top menu.”
30
You may need to press the TOP MENU or MENU
button to display disc menu (depending on the
actual DVD video disc.)
If the disc tray contains a disc you have already
played, playback will begin from the location where
you last stopped playback.
29
To start playback in the stop mode
Press PLAY.
POWER button on the DVD video player
The POWER button on the DVD video player is
equipped with a special function, besides turning the
power on and off. By holding it down longer than usual
while the power is on, you can operate the DVD video
player as follows: (Not applicable to the POWER button
on the remote control.)
• Holding down for about 1 to 3 seconds
to reset NUON game play, etc.
• Holding down for more than about 3 seconds
to turn off the DVD video player which will not
respond to your command during NUON game
play, etc.
DVD
CD
POWER
OPEN/CLOSE
OPEN/CLOSE
PLAY
PLAY
STOPPAUSE
SKIP
OPEN/CLOSE
POWER
3
21
4
PAUSE STOP

Table of Contents

Related product manuals