Before Operation - VCR part (Continued)
How to use the main menu
This DVD+VCR can easily be programmed by
using the menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
11
Switch on your TV set and video recorder by pressing
the
++
++
//
//
11
11
button.
22
Press VCR MENU button.
The main menu will appear on the TV screen.
zz
REC - Timer recording setting (see p. 23).
zz
PR SET - Manual tuning setting (see p. 15).
zz
ACMS - ACMS (Automatic Channel Memory
System) (see p. 14).
zz
TIME DATE - Date & clock setting (see p. 13).
O SYSTEM - To set the Colour TV System
(see p. 13).
O ABC OSD - To change the language setting for
OSD.
You can select the language among
English, Deutsch, Français, Italiano,
Español, Dutch and Portugu
ê
s.
O Dr. - To check a problem with your VCR
(see p. 32).
O F.OSD ON/OFF - To display the operational
mode of your VCR (see p. 31).
O 16:9/4:3 - To select the aspect ratio of your TV
(see p.32).
O DECODER - To use a pay-TV decoder (or Satellite)
with your VCR
(
see p. 32
).
O OPR - To improve the playback picture
(see p. 21).
O NIC -
To activate or deactivate the NICAM digital
sound (
see p. 31
).
33
Press 1 and 2 to select the desired menu.
Press
ENTER/OK and use 3 or 4 to select.
44
Press VCR MENU to return to a TV picture.
Tuning in TV Stations Automatically
If the TV broadcast signal is weak your DVD+VCR
may not detect the necessary information and will
not be able to store them correctly. To overcome this
problem please turn to the MANUAL TUNING
section on page 15.
11
Press
++
++
//
//
11
11
to turn on your DVD+VCR.
22
Press VCR MENU button.
The main menu will appear on the TV screen.
Press
1 or 2 to select the ACMS.
Press
ENTER/OK.
33
Press 1 or 2 to select COUNTRY.
(
A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, Others)
Press ENTER/OK again to start the automatic
tuning process.
44
The TV STATION TABLE will appear when tuning
is complete.
Press VCR MENU to save your settings.
Notes
O The DVD+VCR’s clock will be set automatically when
automatic tuning has finished. If the clock is wrong
please see “Setting the clock manually” on page 13.
O Please note currently only a limited number of TV
companies transmit the
Programme Delivery
Control (PDC) signal which enables your DVD+VCR
to successfully identify and store them. If your
DVD+VCR has difficulty in identifying a TV station
please turn the page to find out how to manually tune
in and name a TV station. While automatic tuning is
taking place the time and date will set automatically.
If - - :- - appears in the DVD+VCR display it means
that the broadcast signal is weak and the clock was
not set. Please turn to
CLOCK SET section of this
book on page 13.
To Next Page
Loading...
