Before Operation - VCR part (Continued)
PREPARATION
Tuning in TV Stations Manually
In certain areas of the country broadcast signals
may be too weak for your VCR’s automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually in order for your VCR to store them.
11
Press VCR MENU.
The main menu will appear on the TV screen.
Press
1 or 2 to select the PR SET.
Press
ENTER/OK.
22
Press VCR MENU.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune (for example, PR 09).
3
Press ENTER/OK.
Press
INPUT SELECT to select C (Standard
stations) or
S (Cable stations):
C02 - C69, S01 - S41.
Enter the channel number of station that you want
to tune with
the numbered buttons or use 3 or 4
to find the required station.
44
Press ENTER/OK and select the “PAL” or “SECAM”
by pressing
3 or 4.
55
Press ENTER/OK.
Press 2 to select MFT.
Control the fine tuning of the station by using 3 or 4.
66
Press 2 to select STATION so that you may name
your TV station.
Press
ENTER/OK.
The TV station name list will appear.
77
Use D or E to select a station name from the list.
Press ENTER/OK to select it.
To Next Page
Loading...
