Toshiba SD-34VLSL User Manual (English)

Questions and Answers:

M
Marvin JohnsonAug 16, 2025
Why is my Toshiba SD-34VLSL remote control not working?
- H
  Hector ChavezAug 16, 2025
  If your Toshiba DVD Player remote control isn't working, first, make sure there are no obstacles blocking the path between the remote and the unit. Then, replace the batteries with new ones. Ensure you're pointing the remote at the DVD Player's remote sensor, and that you're within 23 feet (7 meters) of the unit. Finally, if you're using the remote for VCR functions, press the VCR button first; for DVD functions, press the DVD button.
A
Angela Bowman MDAug 19, 2025
How to fix a Toshiba SD-34VLSL DVD Player with no power?
- J
  Jessica MerrittSep 12, 2025
  If your Toshiba DVD+VCR player has no power, ensure the power cord is securely plugged into the wall outlet.
A
Alexis HunterAug 22, 2025
What to do if my Toshiba DVD Player has no sound?
- A
  amandacruzAug 22, 2025
  If there is no sound from your Toshiba DVD+VCR, first, check that the equipment connected with the audio cable is set to receive the DVD+VCR signal output. Next, ensure the audio cables are securely connected. Also, verify that the connected equipment is turned on. Finally, check that the Digital Audio Output is set correctly, then turn the DVD+VCR on again.
D
Donna AguilarAug 26, 2025
Why won't my Toshiba SD-34VLSL start playback?
- D
  Daniel StevensAug 26, 2025
  If your Toshiba DVD+VCR does not start playback, ensure you've inserted a playable disc (check the disc type and regional code). Make sure the disc is placed with the playback side down and correctly within the guide. Also, ensure the disc is clean. Finally, check if the Rating level is set and, if so, cancel the Rating function or change the rating level.
B
Brian GreenAug 28, 2025
Why is there no picture on my Toshiba DVD Player?
- J
  James ParksAug 28, 2025
  If you're getting no picture from your Toshiba DVD+VCR, first, make sure your TV is set to the correct input to receive the DVD+VCR signal. Next, check that the video cable is securely connected. If you're using component video input, ensure Progressive Scan is set to Off.
R
Robert HoAug 31, 2025
Why is my Toshiba SD-34VLSL showing abnormal picture and/or colour?
- L
  lsanchezAug 31, 2025
  If you're getting an abnormal picture or color (pinkish, greenish, etc.) on your Toshiba DVD+VCR, first, select the correct TV output in the SETUP menu to match your TV. Then, check the video connection to ensure it is correct.
C
Christopher WilsonSep 3, 2025
What to do if Toshiba DVD+VCR does not work but the power is on?
- K
  kelly51Sep 3, 2025
  If your Toshiba DVD+VCR does not work even when the power is on, make sure the DVD or VCR button is switched properly. Also, check that a disc or tape is inserted and the disc or tape indicator in the display window is lit.
M
mary10Sep 6, 2025
Why is there no Hi-Fi sound on my Toshiba SD-34VLSL DVD Player?
- D
  Danielle HarperSep 6, 2025
  If you're not getting Hi-Fi sound from your Toshiba DVD+VCR, select STEREO by repeatedly pressing AUDIO on the remote control. Also, make sure NICAM in the menu is set to AUTO for the station to be recorded.
J
jamesonealSep 9, 2025
How to improve poor playback picture on Toshiba DVD Player?
- T
  Thomas CaseySep 9, 2025
  If the playback picture on your Toshiba DVD+VCR is poor, try these steps: 1. Clean the disc. 2. Check the TV tuning and carry out tuning again. 3. Clean the video heads. 4. If using a rental tape or one recorded on another VCR, use PR/TRK (+/-) for manual tracking adjustment while the tape is playing. 5. Ensure your TV supports 625p Progressive scan picture or set Progressive scan to off.
L
Lindsey TateSep 12, 2025
Why is timer recording not possible on my Toshiba DVD Player?
- D
  David NealSep 12, 2025
  If timer recording is not possible on your Toshiba DVD+VCR, set the clock to the correct time. Reprogram the Timer. Press +/1 to switch to Timer recording standby mode.