Toshiba SD-V280 - Setting the language

23
Basic setup
Press SET + or – to select “LANGUAGE”, then
press ENTER.
Press VCR MENU.
If you use the unit for the first time and
press VCR MENU, instead of the
main menu screen on the right the
“SYSTEM SET UP” menu screen in
step 2 may appear.
Setting the language
Setting the language
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
1
2
Press SET + or – to select the desired language:
English (ENGLISH), Spanish (ESPAÑOL) or
French (FRANCAIS), then press ENTER.
3
Press VCR MENU until the MENU screen is
cleared.
4
〈+/-/ENTER/MENU〉
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SET UP
SYSTEM SET UP
〈+/ - /ENTER/MENU〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
Notes:
• Both the VCR and the DVD have their own player menus
56
.
• If no buttons are pressed for more than 60 seconds, the
VCR MENU screen will return to normal TV-operation au-
tomatically.
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
2, 3
2, 3
1, 4
2A70901D (E)p18-25 1/6/2002, 22:5723