sem g (con. ued)
If the AUTO CLOCK process did not set _heda_earid time correctly,
you must set them manually for timer recording and DAYLIGHT
SAVINGTIME.
,D CD C) CD
C) <7
CTD_ CD C
I
2-4
CANCEL
24
EXAMPLE: Setting the clock to "8:30 AM _ October,
26 (SUN), 2003.
PressVCR MENU.
VCR MENU
SETUP
PreSS SET ÷ or-to select "SYSTEM SETUP",
then press ENTER.
+
Press SET ÷ or- to select "CLOCK SET",
then press ENTER.
+
Press SET ÷ or- to set the month, then press
ENTER.
+
Set the day, year and time as in step 4.
After setting the clock, date and time starts
functioning automatically.
• To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET ÷ or-.
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. Ir_this case, reset the present time.
126
To Next Page
Loading...
