ner setting (continued)
BUTTONS
Repeat the step I on page 27. Then press SET +
or - to select the "ADD/DELETE" and press
ENTER.
To Add or Delete desired channels
[] Press Number buttons or SET + or- to select
a channel number you want to add or delete.
[] To add channels
Press ENTER until "ADD" appears on the
screen.
To delete channels
Press ENTER until "DELETE" appears on the
screen. The channel number will blink.
[] Repeat [] to [] to add or delete other channel.
Press VCR MENU until the menu screen is
cleared.
VCR MENU
SETUP
When you don't want to receive a weak signal broadcast, a
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND "ON". When the unit is shipped from the fac-
tory, the NO NOISE BACKGROUND is set to "ON".
Repeat the steps t-2 on page 26 and press
SET + or - to select "NO NOISE
BACKGROUND".
PressENTER to select "ON" or "OFF" position.
Press VCR MENU until the menu screen is
cleared.
VCR MENU
SETUP
128
To Next Page
Loading...
