.... ,4
_i 'II_CI'_ i'_ I'
TVNCR
, : PAUSE/STILL
STOP
Press STOP to stop recording.
"•" will appear on screen for about
4 seconds.
Press PAUSE/STILL to avoid recording unwanted
material. Press again to continue the recording.
"II1" will appear on screen for
about 4 seconds.
PAUSE/STILL
Notes:
• The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
• You can select a recording channel in the recording pause
mode.
• Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
(3
o
o
ram while
While the VCR is recording, select your desired channel
on the TV.
When a TV is connected with an antenna cable only,
press TVNCR to select the TV position.
The "VCR" display will go offand recording will continue.
Select the TV channel you want to watch by using the
TV channel selector.
Note:
Some CATV hookups do not permit viewing one channel
while recording another. See pages _ and [17_.
351
To Next Page
Loading...
